Plastic resin print parts factory vacuum casting rapid prototype silicone mold
Steps of silicone mold
1. Prototype: before making silicone mold, we need to make prototype. The prototype can be made of common ABS material and processed by CNC.
2. After the prototype of the silicone mold is ready, start making the silicone mold. Eight hours after drying, the silicone die cut open, take out the prototype. At this point, the silicone mold is ready.
3. Injection molding: inject the liquid gum material into the silica gel mold and dry it. The service life of silicone mold is about 25 mold times.
Advantage
Time is fast, cost is less, processing failure probability is small, etc. More than 20 same products can be made with a silicone mold. The cost, cycle and risk of product development are greatly reduced.
Technical Datas
| item | value |
| Place of Origin | China JiangSu |
| Brand Name | OEM |
| Shaping Mode | Plastic Injection Mould |
| Product Material | Plastic |
| Product | Household Product |
| Shaping Mode | Plastic injection mold |
| Product Material | ABS,PP,PC,PA,PMMA,PS,POM etc. |
| Gate type | Side gate,Sub gate, Point gate,Banana gate etc |
| Plastic cavity | Multi or single cavity |
| Mold runner | Both of Hot&Cold runner you can choose |
| Mould material | P20, 718H, NAK80, S136, SKD61 etc |
| Moldbase | FUTABA,LKM,HASCO,DME |
| Tool lifespan | 300,000-1,000,000 shots |
| Certification | ISO 9001 |
| Delivery | By sea or DHL,FEDEX,UPS,air transportation |
Pictures
